<blockquote id="coe2m"><tfoot id="coe2m"></tfoot></blockquote>
  • <abbr id="coe2m"><abbr id="coe2m"></abbr></abbr>
    <strike id="coe2m"></strike>

    當前位置:首頁 > 450噸錫線擠壓生產設備 > 重型軋機

    重型軋機

    重型軋機

    dy.jpg

    各齒輪均采用硬齒面和磨齒工藝;

    All gears adopt hard tooth surface and grinding process;

    ?

    各傳動軸均采用加強型設計;

    All transmission shafts adopt reinforced design;

    ?

    采用大直徑軋輥,軋輥直徑¢104,與傳統軋輥相比,更易咬入,相同產能下可獲得更低的轉速和更高的強度;

    Large-diameter rolling rolls are used, with a roll diameter of ¢104. Compared with traditional rolling rolls, they are more easily bitten into, and under the same production capacity, lower speed and higher strength can be obtained.

    ?

    各部件的密封和潤滑都采用雙層密封;

    All parts are sealed and lubricated with double-layer sealing;

    ?

    電機功率22KW,配齒輪減速箱與主箱體直連,并采用變頻調速;(變頻器品牌為臺達)

    The motor power is 22KW, and it is directly connected to the main gearbox with a gear reduction box, and uses frequency conversion speed regulation; (The brand of the frequency converter is Delta)

    ?

    軋線范圍:¢16¢5.5,一個主箱,八個分箱。軋制速度:最快每分鐘出線64米。

    Rolling range: ¢16¢5.5, one main box, eight sub-boxes. Rolling speed: the fastest output speed is 64 meters per minute.



    廣州精準機械有限公司

    地址:廣州市黃埔區茅崗路828號廣州機械科學研究院30號樓

    GUANGZHOU JINGZHUN MACHINERY CO., LTD.

    Guangzhou Mechanical Engineering Research Institute,No. 828, Maogang Road, Huangpu District, Guangzhou

    精信(樂昌)機械有限公司

    地址:廣東省樂昌市經濟開發區環園東路17號

    JINGXIN(LECHANG) MACHINERY CO., LTD.

    No.17, Huanyuan East Road, Lechang Economic Development District, Guangdong


    電話:+860-20-32388019 / +860-751-5559268

    傳真:+860-20-32388021

    郵箱:gdjzjx@163.com

    網址:gzjingzhun.com

    版權所有 廣州精準機械有限公司     備案號: 粵ICP備13027984號